| 1. | In the end , the design formula of stiffener is put forward which can supply reference to engineering
最后提出了加劲肋设计公式，供工程参考。 |
| 2. | But it is well known that there are many limits in the present design formula on transducer
现有涡流传感器设计公式中的局限性是为从事设计的人们所熟知的事实。 |
| 3. | Then the tests result is compared with results of finite - element analysis and design formulae and the difference of them are analyzed
并将试验结果与有限元分析结果和我国规范公式计算结果进行了比较，分析了偏差产生的原因。 |
| 4. | And database of test of kkt - joints is produced . finally , available references for constituting and consummating of chs design formulae are given
为我国钢结构规范有关圆管节点承载力计算公式的建立和完善提供了有意义的参考。 |
| 5. | Through the relations of throttle pressure with the flux and slice deformation , the analytic design formulas of valves parameters of hydro - pneumatic spring is established
摘要利用开阀压力与阀片变形以及流量之间关系，建立油气弹簧阀系参数解析设计公式，利用该公式可对阀系参数进行解析设计。 |
| 6. | In order to confirm the stress of the plastic screw gear , it is necessary to modify the straight design formula 1 and 2 , so as to compensate the contact pressure caused by different gear shape
为确定作用在塑料螺旋轮所受的应力，需要修改直轮设计公式1和2 ，以补偿二者之间形不同而所受的接触压力不同。 |
| 7. | The existence of perforation affects buckling characteristic and load capacity of members and makes the design formula different with that of non - perforated members
孔的存在导致薄膜应力的重新分布，影响构件的屈曲特性和承载能力，使得无孔构件的分析与设计公式不再适用于开孔构件，因此有必要研究开孔构件。 |
| 8. | Through researching the general laws of run _ off formation , deducing the design formula of drainage discharge and analyzing e ach parameter of the formula , the reasonable calculation method for parameters i n the drainage design formula , is presented
通过研究地表径流的形成规律，对排水流量设计公式的推导和计算公式中各参数意义的分析，提出滑坡排水设计计算公式中各参数的合理计算方法 |
| 9. | Simple design formula on the ultimate compressive strength of gusset plate connections to slotted tubes is presented basing on the results of finite - element study . it has bigness significance to perfect design formula of gusset plate connections to
本文根据有限元分析的结果,提出管板节点计算的简化公式,为管板节点极限承载力设计计算公式的进一步完善提供了有意义的参考,同时对实际工程也有一定的参考价值。 |
| 10. | The main contents of my project are as follows : firstly , according to analysis of program ansys on rwmsw , it is found that : using the design formula , the calculated carrying capacity of shear shows good agreement with the analysis result of program ansys
本课题已经申请国家专利，内容如下： 1应用ansys有限元软件对保温模块剪力墙进行模拟分析，计算得到的抗剪荷载值和公式计算结果较吻合，破坏的过程也非常理想。 |
